Pneumatic Turnover Tool
As with the ETT, the Pneumatic Turnover Tool gives the borescope inspector complete control of the speed, and direction of rotor rotation. Adjustable locks allow the operator to preset the motor to the optimum speed. And the locks have quick release, which allow the inspector to slow or stop the rotor as needed.
The Pneumatic Turning Tool's primary component is the Gearbox Assembly, which includes an air motor. The standard Gearbox Assembly (18932) has a maximum speed of 0.16 rpm at 90 psi (50 CFM) with a gear ratio of 2.817:1.
The Gearbox Assembly is mounted to the engine by means of an Adapter Assembly or Support Frame. A Drive Shaft connects between the gearbox and the engine's mounting location. A Foot Control (18902C) or a Hand Control (18903) remotely actuates the Gearbox Assembly. Either control can vary the Gearbox Assembly's speed to as low as 1/15 rpm.
The controls can also start, stop, and reverse engine rotation. The Output Shaft of the Gearbox is equipped with a shear pin to prevent damage to either the Gearbox or the engine if the rotor becomes "frozen".
| Engine Model | Drive Location (Rotor Boroscoped) |
SWE Kit No. Hand Operated |
SWE Kit No. Foot Operated |
Engine MFG. P/N |
| Allison | ||||
| TF-41 | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| General Electric | ||||
| CF6-6 | Standard (High pressure rotor) | 18910K30 | 18910K20 | |
| CF6-6 | Fan (Low pressure rotor) | 18905K30 | 18905K20 | MSE44C, D |
| CF6-50 | Standard (High pressure rotor) | 18910K30 | 18910K20 | |
| CF6-50 | Fan (Low pressure rotor) | 18605K30 | 18905K20 | MSE44C, D |
| 80A1 | Standard (High pressure rotor) | 18910K30 | 18910K20 | |
| TF-39 | Fan (Low pressure rotor) | 18905K30 | 18905K20 | MSE44C, D |
| LM2500 | Manual Drive Pad (High pressure rotor) | 18918K30 | 18918K20 | 1C8208G02 |
| IM2500 (Industrial) | Main Fuel Pump Pad (High pressure rotor) | 18917K30 | 18917K20 | 1C8208G01 |
| IM2500 (Marine) | Manual Drive Pad (High pressure rotor) | 18937K30 | 18937K20 | 1C8208G03 |
| CF6-80A (767) | Standard (High pressure rotor) | 18929K30 | 18929K20 | 2C14635G01 |
| CF-80C | Standard (High pressure rotor) | 18946K30GE | 18946K20GE | 2C14649P04, P05 |
| CF-80E1 | Standard (High pressure rotor) | 18951K30GE | 18951K20GE | 2C14649P06, P07 |
| F101-(B-1B) | Standard (High pressure rotor) | 18927K30 | 18927K20 | |
| F110 | Standard (High pressure rotor) | 18936K30 | 18936K20 | 3C3583G01B |
| CFMI | ||||
| CFM56-2 (DC8) | Standard (High pressure rotor) | 18926K30 | 18926K20 | 856A1142P04 |
| CFM56-2 | Singal Device (Used with 18901 Airmotor) | 18940K | 18940K | 856A1340P01 |
| CFM56-2 | Singal Device (Used with 18902 Airmotor) | 18942K | 18942K | 856A1340P02 |
| CFM56-3 | Singal Device (Used with 18901 Airmotor) | 18943K | 18943K | 856A1340P03 |
| CFM56-3 | Singal Device (Used with 18902 Airmotor) | 18944K | 18944K | 856A1340P04 |
| CFM56-3 (737-300) | Standard (off wing) (High pressure rotor) | 18933K30 | 18933K20 | 856A2002P02, P01 |
| CFM56-3 (737-300) | Standard (on wing or off) (High pressure rotor) | 18935K30 | 18935K20 | 856A2002P04, P03 |
| CFM56-5A320 | Standard (on wing or off) (High pressure rotor) | 18947K30 | 18947K20 | 856A1488P02, P01 |
| Pratt & Whitney | ||||
| F401-PW-400 | Fan (Low pressure rotor) | 18915K30 | 18915K20 | |
| F117 (C-17) | Standard (High pressure rotor) | 18945K30 | 18945K20 | |
| JT3C | Starter Pad on Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| JT3C | Starter Quick-Disconnect Flange (High pressure rotor) | 18908K30 | 18908K20 | |
| GG3 | Starter Pad on Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| GG3 | Starter Quick-Disconnect Flange (High pressure rotor) | 18908K30 | 18908K20 | |
| J57 | Starter Pad on Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| J57 | Starter Quick-Disconnect Flange (High pressure rotor) | 18908K30 | 18908K20 | |
| JT3D | Starter or Hydraulic Pump/Pad on Gearbox (high pressure rotor) | 18904K30 | 18904K20 | |
| JT4A | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| GG4 | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| FT4 | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| J75 | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| JT8D (All) | Starter or Hydraulic Pump/Pad (High pressure rotor) | 18904K30 | 18904K20 | |
| JT8D (All) | Starter Quick-Disconnect Flange (High pressure rotor) | 18906K30 | 18906K20 | |
| JT8D (All) | Fan (Low pressure rotor) | 18907K30 | 18907K20 | |
| JT9D-3, JT9D-7, JT9D-70 | Standard (High pressure rotor) | 18900K30 | 18900K20 | |
| JT9D-15, JT9D-20, JT9D-59, JT9D-70 | Standard - Wing Engines (High pressure rotor) | 18901K30 | 18901K20 | |
| JT9D-15, JT9D-20, JT9D-59, JT9D-70 | Standard - Tail Engines (High pressure rotor) | 18902K30 | 18902K20 | |
| JT9D-7R4D1, E1, H1 (A300/310) | Standard (High pressure rotor) | 18903K30 | 18903K20 | PWA75212 -2, -1 |
| JT9D (All) | Fan (Low pressure rotor) | 18905K30 | 18905K20 | |
| TF30 (All) | Direct to Gearbox (High pressure rotor) | 18904K30 | 18904K20 | |
| TF30 (All) | Starter Quick-Disconnect Flange (High pressure rotor) | 18908K30 | 18908K20 | |
| TF30 (All) | Hydraulic Pump Quick-Disconnect Flange (High pressure rotor) | 18909K30 | 18909K20 | |
| JT9D-7R4D -767 | Standard (High pressure rotor) | 18913K30 | 18913K20 | PWA75213 -2, -1 |
| JT9D-7R4G2 (SUD747) | Standard (High pressure rotor) | 18916K30 | 18916K20 | PWA75214 -2, -1 |
| PW2000 -757 | Standard (High pressure rotor) | 18928K30 | 18928K20 | PWA80817 -2, -1 |
| PW4000 | Standard (High pressure rotor) | 18934K30 | 18934K20 | PWA85572 -2, -1 |
| IAE | ||||
| V2500 | Standard (High pressure rotor) | 18938K30 | 18938K20 | 2F10066 2F10057 |
| V250005 | Standard (High pressure rotor) | 18949K30 | 18949K20 | |
| Roll-Royce | ||||
| RB-211 | Standard (High pressure rotor) | 18911K30 | 18911K20 | |
| RB-211 | Fan (Low pressure rotor) | 18905K30 | 18905K20 | |
| RB-211 | Standard (Intermediate rotor) | 18920K30 | 18920K20 | |
| Trent | Standard (High pressure rotor) | 18950K30 | 18950K20 | |